shedsales
shedsales.com.au home page
    about us | contact us | refund policy | privacy policy |
Welcome to shedsales
design your shed online NOW
About TL-5® square rib cladding for steel buildings
TL-5® square rib
TL-5® is the name of Fielder's square rib profile. It is suitable for roof cladding and wall cladding on steel buildings. It is available in Colorbond and Zincalume finishes, and it is manufactured from from high tensile steel in both 0.42mm and 0.48mm base metal thicknesses (BMT). There is a 0.35mm product available for use in wall cladding only. We rarely use this because it is almost the same price as the stronger and superior 0.42mm BMT range.

TL-5 brochure
photo of TL-5 shed cladding
drawing of TL-5 shed roof and wall sheet TL-5 is exactly the same price and weight as the S-Rib corrugated cladding because it is made from exactly the same materials with the same coverage, but formed into a different shape. The TL-5 with its deeper rib and flat pans can span slightly longer distances between purlins. Occasionally TL-5 may give a saving over S-Rib for roof cladding by needing fewer purlins in the roof frame. Usually the S-Rib is very slightly cheaper because but some of the flashings do not need to be as wide due to the lower rib depth.
(Colorbond® and Zincalume® are registered trademarks of BlueScope Steel Limited, TL-5® is a registered trademark of Fielders.)
 
Shedsafe logo
©2007-2017 Shedsales.com.au Pty Limited. All rights reserved. v2.0a